Appendix (continued)
1.Normal (Output only)
2.
3.ECP (requires IEEE 1284 printer/parallel cable)
7.Select ECP and click OK to save results and close the window.
8.Click Yes to restart the computer.
NOTE: Changes made in the Sony Notebook Utility are also made in the BIOS.
Sony
1.In Windows® 95, open the Start Menu.
2.Select Tool Center.
3.Select Sony Notebook Setup.
4.Select the Printer/FDD tab.
5.Make sure Use as printer connector is selected and choose the desired port mode required by the printer. There are three options available on this screen:
1.Normal (Output only)
2.
3.ECP (requires IEEE 1284 printer/parallel cable)
6.Select ECP and click OK to save results and close the window.
7.Click Yes to restart the computer.
NOTE: Changes made in the Sony Notebook Utility are also made in the BIOS.
33
