Manually Configuring your Router
Setting your ISP Connection to Static IP (IPoA)
This connection type is also called “Classical IP over ATM” or “CLIP”, which your ISP provides a fixed IP for your Router to connect to the Internet.
(1)
(2)
(3) 
(4)
(5) 
1.WAN IP Address – Enter an IP address assigned by your ISP for the Router WAN interface.
2.WAN Subnet Mask - Enter a subnet mask assigned by your ISP.
3.Default Route - Enter a default gateway IP address. If the Router cannot find the destination address within its local network, it will forward the packets to the default gateway assigned by your ISP.
4.VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. These identifiers are assigned by your ISP.
5.Encapsulation - Select LLC or VC MUX your ISP uses.
32
