Connecting and Configuring your Router
Table of Contents | sections | 1 | 2 |
Step 1: Hardware Connections
| WAN |
|
|
|
|
| D |
A | LAN | C |
|
D |
| C | |
|
|
D 
3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
A
B
A.Unplug your modem’s power cord. Put the Router next to the modem. Raise the Router’s antenna.
B.Locate the networking cable that connects your modem and computer. Unplug that cable from your modem, and plug it into any gray port on the back of the Router.
C.Find your new networking cable (included in the box with your Router) and connect it to the yellow port on the back of the Router. Connect the other end to your modem, in the port that’s now free.
D.Plug in your modem’s power cord. Wait 60 seconds for the modem to start up. Plug the Router’s power supply into the black port on the back. Plug the other end into the wall outlet.
EWait 20 seconds for the Router to start up. Look at the display on the front of the Router. Make sure at least one of the “Wired” and “Power” icons are lit up in green. If they are not, recheck your connections.
G Wireless Router | 13 |
