Belkin PM01110EA user manual WEP Setup Bit WEP Encryption, AF 0F 4B C3 D4 = 64-bit WEP key

Using the Web-Based Advanced User Interface

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

WEP Setup

64-Bit WEP Encryption

1.Select “64-bit WEP” from the “Security” menu’s “Security Mode”.

2.After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually, or you can put a check mark in “Passphrase”, then type in your passphrase. Click “Generate” to generate four different hex keys.

A hex (hexadecimal) key is a combination of numbers and letters from A–F and 0–9. For 64-bit WEP, you need to enter 10 hex keys.

For instance:

AF 0F 4B C3 D4 = 64-bit WEP key

3.Click “Apply Changes” to save the setting.

WARNING: If you are configuring the G Wireless Router or access point from a computer with a wireless client, you will need to ensure that security is turned ON for this wireless client. If this is not done, your client will lose its wireless connection.

G Wireless Router 54