NetCommand™ Setup - Getting Started
In order to use your TV’s NetCommand™ feature, you need to provide some detailed information during the setup of your Mitsubishi TV. You must define the Manufacturer of the devices that are connected to the television. For each device, the input to the TV and A/V receiver, and the names for the device are
On your remote control, the ADJUST 
(left) and 
(right) buttons allow you to navigate left and right to different selections on the screen. The ADJUST 
(up) and 
(down) buttons allow you to:
•Change the selected radio button
•Change selection in text boxes
•Show text boxes
The ENT (ENTer) button allows you to:
•Confirm the selected character when naming a device
•Add or delete check marks in check boxes
•Select push buttons to change screens
Buttons
Much like the software on your computer, you will use graphic buttons to navigate through the NetCommand™ Setup screen. Highlight the button and press ENTer to select the function.
<Back Button
Use the <Back button to navigate back to the previous screen.
Next> Button
Use the Next> button to navigate forward to the next screen.
Cancel Button
Radio Buttons
The setting changes when radio button is selected
Checkbox
Checkmarks indicate the item or input is added or turned On. Press ENTer when the Checkbox is highlighted to add or delete a checkmark. When viewing the Review screen, a Checkbox reflects which devices are turned On or Off, or connected to the TV.
Textbox
The Cancel button will cancel out any changes you are currently making without saving them into memory. When you select the Cancel button, NetCommand™ will prompt you to confirm that you want to cancel the changes you are currently making. If you select Cancel during Initial Setup, You can setup NetCommand™ later by selecting Initial on the Edit NeCommand™ menu.
Press ADJUST 
(up) and 
(down) to make a selection.
26
