Mitsubishi Electronics ws-65712, WS-B55, WS-65511 Component-1 and Component-2 Inputs, VGA Input

Component-1 and Component-2 Inputs

These inputs are compatible with component video signals from standard DVD players and other equipment sending a standard NTSC component video signal (480i). These inputs are also compatible with newer DVD players sending a progressive NTSC component video signal (480p).

VGA Input

This input will accommodate most computers capable of supporting a VGA monitor. The only compatible display resolution is 640x480. The sync rate is 60 Hz. SVGA and XVGA resolutions are not supported.

INP-DTV

This input is compatible with most standard DTV and satellite receivers with component video (YPbPr) outputs. Compatible DTV signals are SDTV 480i/480p, and HDTV 1080i. All other DTV signals, such as 720p, need to be converted by the DTV receiver to one of the compatible signal types. Please check the DTV receiver specifications before connecting.

This input is compatible with some DTV receivers using RGB with sync on green or with “separate H and V sync”. Compatible DTV signals are SDTV 480i, 480p, and HDTV 1080i. All other DTV signals, such as 720p, need to be converted by the DTV receiver to one of the compatible signal types. Industry standards for DTV RGB signals (systems, synchronization, timing, and signal strengths) are not currently established. These inputs will not be compatible with all DTV receivers that offer RGB.

If your DTV receiver offers both DTV component video signals and DTV RGB signals, we suggest you use the DTV component video signals. Check the DTV receiver specifications before connecting.

Input Levels and Timing with Component Video

EIA - 770.1 and EIA - 770.2 Standard Levels & Timing

Y= 1.0Vp-p (includes sync) 75-Ohms

Pr = 700mVp-p, 75-Ohms (can also receive signals from outputs labeled R-Y and Cr)

Pb = 700mVp-p, 75-Ohms (can also receive signals from outputs labeled B-Y and Cb)

Input Levels and Timing When

Used With HD Component Video

Signals

EIA - 770.3 Standard Levels and Timing

Y= 1.0Vp-p (includes sync) 75-Ohms Pr = 700mVp-p, 75-Ohms

Pb = 700mVp-p, 75-Ohms H = Not Used

V = Not Used

Input Levels and Timing When Used With RGB Video Signals

G= 700mVp-p (no sync), 1Vp-p (with sync) 75-Ohms

R= 700mVp-p, 75-Ohms B = 700mVp-p, 75-Ohms

H = 4Vp-p+/-1.0v, 75-Ohms

(when using separate H and V sync)

V = 4Vp-p+/-1.0v, 75-Ohms

(when using separate H and V sync)

Appendix B: Input Connection Compatibility

NetCommand™ IEEE 1394 & HAVi System Compatibility

This television is designed to conform to IEEE 1394 AV/C and HAVi Software standards in effect at the time of development. This exciting new networking and control technology is designed to provide high- performance digital connections and product control, making products easier to use.

At the time of development, only one other product was available for compatibility testing - the Mitsubishi HD VCR, model HS-HD2000U. This D-VHS VCR is fully compatible with this TV.

As other manufacturers produce products that use IEEE 1394 AV/C and HAVi, they will be responsible for the development of their products to meet the standards of the technology, as well as compatibility testing with other products. Mitsubishi cannot be responsible for their efforts, and therefore cannot promise compatibility with these other products. Any compatibility problems with other manufacturers products

should be brought to the attention of those manufacturers.

73