Mitsubishi Electronics WS-73711, WS-B55, ws-65712, WS-65511 Appendix E Diamond Shield Instructions

Appendix E: Diamond Shield Instructions

Diamond Shield™ Installation

for Models WS-B55, WS-55511, WS-65511 and WS-65611

The instructions below will lead you through the Diamond Shield installation process.

Included in the Diamond Shield package are the following items:

For model WS-65511 and WS-65611 only.

(1)Diamond Shield™

(2)molding clips

1.Carefully remove the Diamond Shield™ from its protective packaging. Wipe off any dust with a lint-free cloth.

2.Begin by inserting the shield, sliding it into the channels, starting at one side. Gently bow the Diamond Shield™ toward you and insert the side of the Diamond Shield™ into side channel then install the opposite side.

3.Install the top and bottom molding clips

by pressing them into the opening, starting at a corner. Do not force the clip. The clip will slide into place. This completes the Diamond Shield™ installation.

To remove the Diamond Shield™, reverse the order of the above process.

Diamond Shield™ for the models WS-B55 and WS-55511 comes installed by the factory.

Appendix E: Diamond Shield Instructions

77