Mitsubishi Electronics WS-B55 manual Changing PIP/POP Device, Changing PIP/Side-by-Side Channels

Remote Control Functions: Operation of PIP and POP

MAIN	Side-by-Side
PICTURE

Figure 1

Changing PIP/POP Device

Press PIP DEVICE to change the PIP or POP picture source device. A menu similar to the Device Selection menu will be displayed.

Changing PIP/Side-by-Side Channels

Press PIP CH to scroll up and down through memorized channels on Ant-A and Ant-B.

MAIN

PICTURE

Figure 2

P1

P2

P3

Exchanging Program Images

Press EXCH to exchange the main picture and the PIP/POP picture.

Moving PIP Image

If no menus are on the screen, press ADJUST to move the PIP display anywhere on the main screen.

MAIN

PICTURE

Figure 3

P1	P2	P3
P4	P5	P6
P7	P8	P9

Automatic POP Switching

When automatic POP switching is active, the TV will cycle through memorized channels on Ant-A or Ant-B or strobe pictures from other A/V components in the POP display. Press PAUSE to pause or restart automatic POP switching.

Selecting POP “Live” Image

Press ADJUST to select a different POP

�����������������������

��������

����������

����������

����

Figure 4

“live” image (automatic POP switching must be paused.)

Freeze the PIP and Side-By-Side Picture

Press PAUSE to freeze the PIP and side-by-side images. Press PAUSE again to return to a “live” image.

IMPORTANT

•Side-by-Side cannot show the same channel or device on both sides.

•ANT-B is not available as the PIP or Side-by-Side while ANT-A is the main image.

•PIP/POP is compatible with 480i signals. PIP/POP is not compatible with 480p, 1080i signals or signals from ANT-DTV, IEEE 1394 devices or VGA input.

63