Mitsubishi Electronics WS-55711, WS-B55 manual Antenna or Wall Outlet Cable for Digital Broadcasts

Connecting Antenna or Wall Outlet Cable for Digital Broadcasts

Figure 1. Antenna or wall outlet cable.

Antenna or Wall Outlet Cable for Digital Broadcasts

For cable or antenna with coaxial lead (Figure 1)

1.Connect the incoming cable to ANT-DTV on the TV back panel.

Mitsubishi strongly recommends against using antennas with twin flat leads. Twin flat lead antenna wires are subject to interference which may adversely affect the performance of the TV. We recommend using coaxial antenna cable.

IMPORTANT

Additional connection cables are not provided with the TV. They are available at most electronic stores.

Connecting an Analog Antenna, Wall Outlet Cable, or Cable Box

Separate UHF and VHF Antennas

(Figure 2)

1. Connect the UHF and VHF antenna leads to the UHF/VHF combiner.

2. Push the combiner onto ANT-A on the TV back panel.

Note: UHF/VHF combiners are not provided with the TV. They should be available at most electronic stores.

Mitsubishi strongly recommends against using	Figure 2. Connecting separate UHF and VHF antennas.
antennas with twin flat leads. Twin flat lead antenna
wires are subject to interference which may
adversely affect the performance of the TV. We
recommend using coaxial antenna cable.

17