Mitsubishi Electronics WS-B55, ws-65712 Advanced Convergence Menu, Language Menu, Transport Menu

Setup Menu: Advanced Convergence, Transport Menu, and Language

Press INFO for help

Figure 1. Advanced Convergence menu

IMPORTANT

There are more than 64 line intersections but the flashing bracket only stops at the 64 adjustment positions.

Figure 2. Setup menu (Transport menu selected)

Advanced Convergence Menu

(Figure 1)

After adjusting the Red Convergence and Blue Convergence, you can fine-tune your TV by adjusting the Red and Blue convergence at 64 individual points.

1.Move the flashing bracket to a position needing adjustment by pressing , , , or .

2. Press ENTer to select the position (flashing will stop).

3. Move the Red or Blue line by pressing	, , or
.

4.Press VIDEO to switch between the Red and Blue lines. A position is properly converged when all three lines combine to appear white.

5.Press ENTer to deselect the position (flashing will resume), and move the brackets to the next position needing adjustment.

6.When completed, press MENU or HOME to save your changes, and exit the Advanced Convergence screen.

7.Press INFO to display detailed instructions on using the Advanced Convergence. Then press INFO or MENU to return to the Advanced Convergence menu.

Language Menu

(Figure 2)

Display the on-screen menus in either English or Spanish (Español). The first time your TV was powered on, you were requested to select an on- screen menu language. When the radio button setting is changed, the screen language changes automatically.

Transport Menu

Figure 3. Transport menu

(Figures 2 and 3)

The Transport Menu is used by NetCommand™ to control VCRs, DVDs, IEEE 1394 AV Disc, digital VCRs, and similar devices. This menu can be turned off if you would rather not have it displayed. The transport buttons on the remote control will continue to operate these devices. See the NetCommand™ Guide for further details.

45