Antenna Menu: Antenna, Memorize Channels, Channel, Memory and Name
Antenna Menu
(Figure 1)
Select
Memorize | Figure 1. Antenna menu |
(Figure 1) |
|
For ANT-A or ANT-B
Select either Air (when used with an indoor/outdoor antenna) or Cable (when used with direct cable) then press ENTer to start the automatic channel memorization process.
For ANT-DTV
Select Air when used with an indoor/outdoor antenna. Select Cable when used with Direct cable.
There are three types of Cable systems: Standard, IRC and HRC. To memorize Standard or IRC, select Cable; to memorize HRC, select Cable (HRC).
Check with your Cable company to determine which type of Cable system they use. If your cable company cannot help you, select Cable.
On
Memory
(Figure 1)
After the available channels have been memorized with Memorize, weaker channels viewed with
or 
or 
button on the remote control to see the channels in memory. Use Adjust 
or 
to select Added or Deleted for the channel shown in the “Channel” option box.
To stop the automatic channel memorization process, press CANCEL. Channels memorized before you pressed CANCEL are retained in memory.
After memorizing channels, the channels in the memory can be accessed in ascending or descending order or by pressing the CH 
or buttons.
Channel
(Figure 1)
Select the channel you want to add or delete from memory, name, or add to an SQV (SuperQuickView™) list.
Use ADJUST 
or 
to select the channel for editing or use the CH 
or 
buttons for only those channels already in memory.
Name
(Figure 1)
Channels shown on
1.Use Adjust 
or 
to select each letter
2.Press ENTer to set the letter and move to the next letter position.
3.Press CANCEL to move back one position.
46
