Mitsubishi Electronics WS-48511, WS-B55, ws-65712, WS-65511, WS-65611, WS-65711, WS-73711 Installation

Appendix E: Diamond Shield Instructions

Diamond Shield™ Installation for Models WS-48511, WS- 55711, WS-65711, WS-65712 and WS-73711

	The instructions below will lead you through the
	Diamond Shield installation process.
	Included in the Diamond Shield package are the
	following items:
		21
	For models WS-65711, WS-65712 and
Installation	WS-73711 only.
	lint-free cloth. Do not use any cleaners on the anti-
	(1) Diamond Shield™
	(2) molding clips
	1. Carefully remove the Diamond Shield™ from
	the protective packaging. Wipe off any dust with a
Shield™	glare Diamond Shield™.
	the Diamond Shield™ into the top channel.
	2. Begin by inserting the shield, sliding it into the
	channels, starting at the bottom. Gently bow the
DiamondE:	Diamond Shield™ toward you and insert the top of
	3. Install the left and right molding clips by pressing
	them into the opening, starting at a corner.
	Do not force the clip. The clip will slide
	into place. This completes the Diamond
Appendix	Shield™ installation.
	To remove the Diamond Shield™, reverse

the order of the above process.

Diamond Shield™ for the models WS- 48511 and WS-55711 comes installed by the factory.

3

78