Programming the Remote Control to Control
To Program the Remote to Control Other Brands of Audio and Video Products:
(Figures 1-5)
1.Move the slide switch at the top of the remote to the product you want to control.
2.Press and hold the POWER button on the remote control.
3.Enter the first three digit code listed for your equipment, and then release the POWER button on the remote control.
4.Point the remote control at the equipment and press the POWER button. If the equipment responds, the remote control is properly programmed to operate the equipment. If the equipment does not respond, repeat steps
Figure 2. Programming the remote to control your satellite receiver.
Figure 3. Programming the remote to control your VCR.
Figure 1. Programming the remote to control your cable box.
IMPORTANT
If you cannot turn the cable box ON by pressing POWER, try pressing CHANNEL or the number buttons.
67
