Connecting an External Digital TV (TV or HTV) Receiver, cont.
IMPORTANT
•See Appendix B for RGB video signal compatibility information.
•For digital audio connections, see your DTV Receiver and A/V Receiver Owner’s Guides.
Figure 1. Connecting the DTV receiver with RGB video
External DTV Receiver with RGB Video Connections
(Figure 1)
1.Connect the outside antenna, cable, or satellite to ANT, or SATELLITE IN on the DTV receiver (see your DTV receiver owner’s guide for instructions, and cable compatibility).
2.Connect the incoming terrestrial antenna, or cable (not satellite) to
3.Connect RGB cables for the DTV receiver to
Note: You may need to set the
DTV Receiver / TV Back Panel
•G (green) to Y/G
•R (red) to Pr/R
•B (blue) to Pb/B
Note: If the DTV receiver has outputs for H and V sync, connect as listed below (DO NOT connect if DTV receiver uses “Sync on Green”
•H (horizontal sync) to H
•V (vertical sync) to V
4.Connect the L (left) and R (right) audio cables from the DTV receiver to
23
