NetCommand™ Setup
When you first power On your new Mitsubishi TV, the initial setup screens will appear. You will need to navigate through these screens and properly set up the equipment connected to the TV in order to use NetCommand™.
NetCommand™ supports the automatic switching of audio and video inputs using only the TV Remote Control.
IMPORTANT
You may use your TV without setting up NetCommand™. You may also setup NetCommand™ at a later time by choosing Setup from the Main menu, then select Edit NetCommand™.
Language Screen
Figure 1
The Language screen is the initial menu displayed the first time the TV is turned On. You will need to select the language you would like to use. When you change your selection from English to Spanish, all screens automatically change to Spanish. To change Language later, go to Setup in the Main Menu.
Figure 1. Setup-Language screen.
Information Screen
Figure 2
The Information Screen describes how to proceed with or cancel the initial NetCommand™ Setup.
NetCommand™ Setup is initialized automatically the first |
|
time you power On your new TV. If, for any reason, your |
|
NetCommand™ Setup is cancelled before completing, |
|
follow the steps below to start NetCommand™ setup |
|
later. | Figure 2. NetCommand™ Info screen. |
1. Display the TV Main menu. |
|
2. Select the Setup menu. |
|
3. Select the Edit NetCommand™ option in the Setup |
|
menu. |
|
4. Select Initial on the Edit NetCommand™ menu |
|
Result: The AV Receiver screen displays. |
|
28
