![](/images/new-backgrounds/1244342/24434249x1.webp)
Connecting an S-Video source device
Examine your Video source device to determine if it has an unused
•If so, you can continue with this procedure.
•If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to an S-Video source device
1.Take an appropriate
2.Connect the other end of the
S-Video cable
A/V device
•If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.
•If you have already made a Component Video connection between the projector and this S- Video source device using Component Video connections, you need not connect to this device using an