Using the projector26
Switching input signal
The projector can be connected to multiple devices
at the sa me time . Howeve r, it can only di splay o ne at
a time. To cycle through the available input sources,
press the SOURCE button. A source selection menu
will display at the center of the screen after you press
the button.
The brightness level of the projected image will
change accordingly when you switch between
different input signals. Data (graphic) "PC"
presentations using mostly static images are
generally brighter than "Video" using mostly moving
images (movies).
The input type affects the options available for th e Application Mode. See "Selecting an
application mode" on page 25 for details.
Hiding the image
In order to draw the audience’s full atte ntion to the
presenter, you can press the BLANK (or BLANK /
5Up) button to hide the screen image. Press the
button again to restore the image. The word
“BLANK” appears at the bottom right corner of the
screen while the image is hidden.
You can set the blank time in the Advance --

> Blank Time menu to let the projec tor return the

image automatically after a period of time when
there is no action taken on the blank screen.
Do not block the projection lens from p rojecting as this could cause the blo cking object to
become heated and deformed or even cause a fire.
Remote paging operationsFreezing the image
You can operate your display software program (on a connected PC)
which responds to page up/down commands (like Microsoft PowerPoint)
by pressing Page U p and Pag e Down on the rem ote cont rol. See
"Connecting a computer" on page 16 for details.
Connect the projector to your PC or no tebook with a USB cable
prior to using this function.
Press the Freeze button on the remote control to freeze the image. An
icon will display in the lower right corner of the screen. To
release the function, pres s the Freeze button on the remote control,
or the SOURCE button.
This does not remotely control the signal source. It just freezes the
currently projected image.