Controls and functions
Projector
1
2 | 8 |
3 | 9 |
4 | 10 |
5 | 11 |
6 | 12 |
7 | 8 |
1.Focus ring
Adjusts the focus of the projected image. See
2.Temperature warning light Lights up red if the projector's temperature becomes too high. See "Indicators" on page 54 for details.
3.Power indicator light
Lights up or flashes when the projector is under operation. See "Indicators" on page 54 for details.
4.
Power
Toggles the projector on or off.
See "Start up" on page 24 and "Shutting down the projector" on page 38 for details.
5.
Left/BLANK
Used to hide the screen image. To restore the image, press any button on the projector or remote control. See "Hiding the image" on page 35 for details.
6.MENU/Exit
Turns on the
Goes back to previous OSD menu, exits and saves menu settings.
See "Using the menus" on page 42 for details.
7.MODE/Enter
Depending upon which input signal is selected, selects an available picture setup mode. See "Selecting a picture mode" on page 31 for details.
Enacts the selected
8.Keystone/Arrow buttons ( 
/
Up, 
/
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 29 for details.
9.Lamp indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 54 for details.
