Lamp information

Calculation of lamp hour

When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows:

Total (equivalent) lamp hour

= 1 (hours used in Economic mode) + 3/2 (hours used in normal mode)

See "Lamp mode (Normal)" on page 47 for more information on Economic mode.

The lamp hour in Economic mode is calculated as 2/3 of that in normal mode. That is, using the projector in Economic mode helps to extend the lamp hour by 1/2.

Warning message

When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode.

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact your dealer. See "Indicators" on page 54 for details.

The following Lamp warning displays will remind you to change the lamp.

Message

Status

Notice

The lamp has been in operation for 2000 hours.

Install a new lamp for optimal performance. If the

 

Order Replacement Lamp

projector is normally run with "Economic Mode"

Lamp > 2000 Hours

selected (See "Lamp mode (Normal)" on page 47),

you may continue to operate the projector until the

 

 

2950 hour lamp warning appears.

OK

 

 

 

Notice

The lamp has been in operation for 2950 hours. A

new lamp should be fitted to avoid the

 

Replace Lamp Soon

inconvenience when the projector runs out of lamp

Lamp > 2950 Hours

time.

 

OK

 

 

 

 

The lamp has been in operation for 3000 hours.

Notice

It is strongly recommended that you replace the

 

Replace Lamp Now

lamp at this age. The lamp is a consumable item.

Lamp > 3000 Hours

The lamp brightness diminishes with use. This is

normal lamp behavior. You can replace the lamp

Lamp usage time exceeded

whenever you notice that the brightness level has

 

OK

significantly diminished. If the lamp is not

 

replaced beforehand, it must be replaced after 3000

 

hours usage.

 

 

50 Maintenance

Page 50
Image 50
BenQ MP511 user manual Lamp information, Calculation of lamp hour