Controls and functions
Projector
1 |
|
2 | 9 |
3 |
|
4 |
|
5 |
|
| 10 |
6 11
7 12
8 13
14
10
1.Focus ring
Adjusts the focus of the projected image. See
2.Zoom ring
Adjusts the size of the image. See "Fine- tuning the image size and clarity" on page 33 for details.
3.TEMPerature warning light
Lights up red if the projector's temperature becomes too high. See "Indicators" on page 61 for details.
4.POWER indicator light
Lights up or flashes when the projector is under operation. See "Indicators" on page 61 for details.
5.II Power
Toggles the projector on or off.
See "Starting up the projector" on page 27 and "Shutting down the projector" on page 47 for details.
6.MENU/EXIT
Turns on the
7. Left/
Starts the FAQ function. See "Utilizing FAQ function" on page 44 for details.
8.BLANK
Used to hide the screen image. See "Hiding the image" on page 43 for details.
9.LAMP indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 61 for details.
10.Keystone/Arrow buttons ( / Up, /
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 34 for details.
11.AUTO
Automatically determines the best picture timings for the displayed image. See "Auto- adjusting the image" on page 33 for details.
12. Right/
Activates panel key lock. See "Panel Key Lock" on page 52 for details.
When the
13.SOURCE
Displays the source selection bar. See "Switching input signal" on page 32 for details.
14.Mode/enter
Selects an available picture setup mode. See "Selecting a picture mode" on page 37 for details.
Enacts the selected
10 Introduction