English
3.Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is Off” displaying on the screen.
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging function. See "Connecting a computer" on page 20 for details.
You can operate your display software program (on a connected PC) which responds to page up/down commands (like Microsoft PowerPoint) by pressing PAGE 
/ 
on the remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and the mouse driver on your computer is updated to the latest
version. | The remote paging |
| function cannot work with |
| Microsoft® Windows® 98 |
| operating system. |
| Windows® XP or higher |
| operating systems are |
| recommended. |
Hiding the image
In order to draw the audience's full attention to the presenter, you can use BLANK on the projector or remote control to hide the screen image. Press any key on the projector or remote control to restore the image. The word 'BLANK' appears at the lower right corner of the screen while the image is hidden.
You can set the blank time in the SYSTEM SETUP: Basic > Blank Timer menu to let the projector return the image automatically after a period of time when there is no action taken on the blank screen.
No matter Blank Timer is activated or disabled, you can press any key except PAGE 
/ 
, ENTER and LASER on the remote control, or ENTER on the projector to restore the
picture.
•Do not look into the laser light window or shine the laser light beam on yourself or others. See the warning messages on the back of the remote control prior to using it.
•Do not block the projection lens from projecting as this could cause the blocking object to become heated and deformed or even cause a fire.
44 Operation
