BenQ MP727 English, Lamp Mode Normal, Reset lamp timer, Equivalent Lamp Hour, Change password

5. SYSTEM SETUP: Advanced menu

	FUNCTION	DESCRIPTION (default setting/value)
	(default setting/
	value)
		Selecting On enables the function. The projector can output a VGA
	Standby D-	signal when it is in standby mode and the D-SUB IN and D-SUB
		OUT sockets are correctly connected to devices. See "Connecting a
	Sub Output
		monitor" on page 21 for how to make the connection.
	(Off)	Enabling this function slightly increases the standby power
		consumption.
		Lamp Mode (Normal)
		See "Setting Lamp mode as Economic" on page 58 for details.
	Lamp	Reset lamp timer
		See "Resetting the lamp timer" on page 62 for details.
	Settings
		Equivalent Lamp Hour
		See "Getting to know the lamp hour" on page 58 for details on
		how the total lamp hour is calculated.
		Change password
		You will be asked to enter the current password before changing to a
	Security	new one. See "Utilizing the password function" on page 30 for details.
		Change Security Setting
	Settings
		Power on Lock (Off)
		Splash Screen Lock (Off)
		See "Utilizing the password function" on page 30 for details.
	Baud Rate	Selects a baud rate that is identical with your computer’s so that you
		can connect the projector using a suitable RS-232 cable and update or
(115200)		download the projector’s firmware. This function is intended for
		qualified service personnel.
	Test Pattern	Selecting On enables the function and the projector displays the grid
	(Off)	test pattern. It helps you adjust the image size and focus and check
		that the projected image is free from distortion.
	Reset All	Returns all settings to the factory preset values.
		The following settings will still remain: Position, Phase, H. Size,
	Settings
		User 1, User 2, Language, Projector Position, High Altitude
		Mode, Security Settings, Baud Rate, My Screen.

English

Operation 55