BenQ MP727, MP735 user manual Connecting a monitor, To connect the projector to a monitor, English

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the D-SUB OUT signal output socket on the projector to an external monitor with a VGA or VGA to DVI-A cable by following the instructions below.

To connect the projector to a monitor:

English

•With a VGA cable:

1.Connect the projector to a computer as described in "Connecting a computer" on page 20. The D-SUB output only works when an appropriate D-SUB input is made to the projector. Be sure the projector is connecting with the computer using the D-SUB/COMP.INsocket, not the DVI-Isocket.

2.Take a suitable VGA cable (only one supplied) and connect one end of the cable to the D-Sub input socket of the video monitor.

3.Connect the other end of the cable to the D-SUB OUT socket on the projector.

•With a VGA to DVI-A cable:

Your monitor must be equipped with a DVI input socket.

1.Connect the projector to a computer as described in "Connecting a computer" on page 20. The D-SUB output only works when an appropriate D-SUB input is made to the projector. Be sure the projector is connecting with the computer using the D-SUB/COMP.INsocket, not the DVI-Isocket.

2.Take a VGA to DVI-A cable and connect the DVI end of the cable to the DVI input socket of the video monitor.

3.Connect the VGA end of the cable to the D-SUB OUT socket on the projector.

The final connection path should be like that shown in the following diagram:

Notebook or desktop computer

1. VGA cable	2 (DVI)	2	1 (VGA)
2. VGA to DVI-A cable	or
2. VGA cable

Connection 21