English
Controls and functions
Projector |
| |
| 9 | |
1 |
| |
2 |
| |
3 | 10 | |
4 | ||
| ||
5 | 11 | |
6 |
| |
7 | 12 | |
8 | 13 | |
| 10 |
1.LAMP indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 63 for details.
2.POWER indicator light
Lights up or flashes when the projector is under operation. See "Indicators" on page 63 for details.
3.TEMPerature indicator light
Lights up red if the projector's temperature becomes too high. See "Indicators" on page 63 for details.
4.
POWER
Toggles the projector between standby mode and on.
See "Starting up the projector" on page 28 and "Shutting down the projector" on page 48 for details.
5.MENU/EXIT
Turns on the
See "Using the menus" on page 29 for details.
6.MODE/ENTER
Selects an available picture setup mode. See "Selecting a picture mode" on page 39 for details.
Enacts the selected
7.
Left/ 
Starts the FAQ function. See "Utilizing FAQ function" on page 45 for details.
8.BLANK
Used to hide the screen picture. See "Hiding the image" on page 44 for details.
9.FOCUS/ZOOM Ring
Used to adjust the projected image appearance. See
10.Keystone/Arrow keys ( 
/
Up, 
/
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 35 for details.
11.AUTO
Automatically determines the best picture timings for the displayed image. See
12.
Right/ 
Activates panel key lock. See "Locking control keys" on page 45 for details. When the
13.SOURCE
Displays the source selection bar. See "Switching input signal" on page 33 for details.
10 Introduction
