BenQ mw814st only be fed into the AUDIO-IN L/R jacks. There is no need to connect, consumption

5. SYSTEM SETUP: Advanced menu

Function	Description
	Network
	Selecting On enables the function. The projector is able to provide the
	network function when it is in standby mode.
	Monitor Out
	Selecting On enables the function. The projector can output a VGA
	signal when it is in standby mode and the COMPUTER 1 jack is
	correctly connected to devices. See "Connection" on page 17 for how to
	make the connection.
Standby	Audio Pass Through
	The projector can play sound when it is in standby mode and the
Settings	corresponding jacks are correctly connected to devices. Press / to
	choose the source that you wish to use. When you select Computer 1 or
	Computer 2, audio signal can only be fed into the AUDIO-IN 1 or
	AUDIO-IN 2 jack. When you select Video,S-Video, audio signal can
	only be fed into the AUDIO-IN L/R jacks. There is no need to connect
	the audio cable when HDMI is selected since the HDMI cable carries
	audio signal.
	See "Connection" on page 17 for how to make the connection.
	Enabling this function slightly increases the standby power
	consumption.
	Wired LAN
	See "Controlling the projector through a LAN environment" on page 35
	for details.
Network	AMX Device Discovery
Settings	Selecting On enables the function. When AMX Device Discovery is On,
	the projector can be detected by AMX controller.
	Mac Address
	Displays the mac adress of this projector.

Returns all settings to the factory preset values.

Reset All	The following settings will still remain: Phase, H. Size, User 1, User
Settings
	2, Color Space Conversion, Projector Position, High Altitude Mode,
	Security Settings, Network Settings and Baud Rate.

48 Operation