BenQ PB6240 Switiching input signal, Hiding the image, Slide operation, Freezing the image

Switiching input signal

The projector can be connected to multiple devices at the same time. To sequentially select input sources, press the Source button on the projector control panel or the remote control. The selected source will be displayed at the bottom right of the screen for 3 seconds.

For a quick search, you can also press the button repeatedly until your desired signal is displayed.

Hiding the image

In order to draw the audience’s full attention to the presenter, you can use Blank to hide the screen image. Press Blank again to restore the image. A word “BLANK” appear at the bottom right corner of the screen when the image is hidden. When this function is activated with video/ S-video signal connected, the background sound still can be heard.

You can set the blank time in the Advance -

-> Blank Time menu to let the projector shut down automatically after a period of time when there is no action taken on the blank screen.

Do not block the projection lens from projecting as this could cause the blocking object to become heated and deformed or even cause a fire.

Slide operation

You can operate your Power Point presentation moving forwards and backwards by pressing Page Up and Page Down.

Connect the projector to your PC or notebook with a USB cable prior to using this function.

Freezing the image

The image is frozen when Freeze is pressed. An icon

will display

in the lower right corner of the screen. To release the function, press Freeze, Source (this will change the input source and release the pause function).

Even if an image is frozen on the screen, the pictures are running on the video or other device. If the connected devices have active audio output, you will still hear the audio even though the image is frozen.

Operation 21