Introduction 9
Controls and functions

External control panel

13
12
10
911
5
34
8
7
2
1
6
1. Power (Refer to pages 17 and 22 for
more information.)
Turns the projector on or off.
2. Source (Refer to page 21 for more
information.)
Sequentially selects the input signal
RGB/YPbPr, Video or S-Vid eo.
3. 3 Left
4. Right 4
When the on-screen menu is not
activated, #3 and #4 function as
Keystone -/+ hot keys.
Refer to page 20 for more information.
5. 5Exit
Exits and saves the menu settings.
6. 6Menu
Turns the on-screen display control
menu on.
When the on-screen menu is activated,
the #3 to #6 buttons are used as
directional arrows to select the desired
menu items and to make adjustments.
Refer to page 24 for more information.
7. Auto (Refer to page 19 for more
information.)
Automatically determines the be st
picture timings for the displayed
image.
8. Blank (Refer to page 21 for more
information.)
Used to hide the screen image. You can
press Blank again to bring the image
back.
9. Power indicator light (Refer to page 34
for more information.)
Lights up or flashes when the projector
is under operation.
10. Temperature warning light (Refer to
page 34 for more information.)
Flashes red if the projector’s
temperature becomes too high.
11. Lamp indicator light (Refer to page 32
for more information.)
Indicates the status of the lamp. Lights
up or flashes when the lamp has
developed a problem.
12. Zoom ring (Refer to page 19 for more
information.)
Adjusts the size of the image.
Rotate clockwise to enlarge the image
or rotate counter-clockwise to make
the image smaller.
13. Focus ring (Refer to page 19 for more
information.)
Adjusts the focus of the projected
image.