BenQ PB9200 user manual Operating, Selecting An Input Signal

PB9200-e.book Page 15 Thursday, May 27, 2004 2:15 PM

Operating

Selecting An Input Signal

1.Select an input signal.

■ Using the INPUT dial

Turn the INPUT dial of the projector. Turning the dial cycles through the input ports as shown below. Select the signal you wish to project.

M1-D RGB BNC

VIDEO S-VIDEO COMPONENT

■Using SEARCH button

Press the SEARCH button of the projector or the remote control.

Pressing the button automatically cycles through input ports and displays the picture of retrieved signal.

memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will turn to the state it was in prior to the search.

M1-D RGB BNC

VIDEO S-VIDEO COMPONENT

■Using RGB button

Press the RGB button of the remote control. Pressing the button toggles between the RGB ports as shown below Select the signal you wish to project.

SEARCH button

KEYSTONE

M1-D SEARCH

RGB INPUT

BNC RESET

COMPONENT ENTER

S-VIDEO MENU

INPUT dial

					VIDEO button
STANDBY/ON				RGB	RGB button
LASER INDICATOR
+		+		+
LENS SHIFT	FOCUS			ZOOM
–		–		–
BLANK	ASPECT			LASER
PREVIOUS				NEXT
	MOUSE
ESC	MENU				SEARCH button
POSITION	RESET			AUTO
MAGNFY	PinP			VOLUME
ON
	FREEZE			MUTE
OFF
	KEYSTONE SEARCH
	1	2	3
ID CHANGE

M1-D RGB BNC

■Using VIDEO button

Press the VIDEO button of the remote control. Pressing the button toggles between the VIDEO ports as shown below Select the signal you wish to project.

COMPONENT S-VIDEO VIDEO

2.Use the FOCUS buttons to adjust the focus.

3.Use the ZOOM buttons to adjust the screen size.

ZOOMFOCUS

FOCUS ZOOM

buttons button

Operating 15