AUTO Menu
With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.
MENU
MAIN | ADJUST |
|
POWER OFF | 0 min | |
POWER ON | TURN ON | |
INPUT | SEARCH | TURN ON |
AUTO | RESET |
|
SCREEN |
|
|
OPTION |
|
|
NETWORK |
|
|
: SELECT |
|
|
Item |
| Description | |||
|
|
|
| ||
| Pressing the 4 (or the ENTER) button performs the automatic | ||||
| adjustment. |
|
|
| |
| ■ At a RGB signal |
|
|
| |
| The vertical position (V POSITION), the horizontal position (H | ||||
| POSITION), the clock phase (H PHASE) and the horizontal size (H | ||||
| SIZE) will be automatically adjusted. | ||||
| memo Make sure that the application window is set to its maximum | ||||
| size prior to attempting to use this feature. Dark pictures may still be | ||||
| incorrectly adjusted. Use a bright screen when adjusting. | ||||
ADJUST | ■ At a video signal |
|
|
| |
The signal type mode best suited for the respective input signal will | |||||
| |||||
| be selected automatically. |
|
|
| |
| memo This function is available only when the AUTO is selected to | ||||
| the item VIDEO of the INPUT menu. For a component video signal, | ||||
| the signal type is identified automatically independently of this func- | ||||
| tion. |
|
|
| |
| memo This operation requires approximately 10 seconds, and the | ||||
| message AUTO IN PROGRESS is displayed during the operation. | ||||
| memo This operation may not work well at some signals. If the pic- | ||||
| ture becomes unstable (ex. a irregular picture, a color lack), please | ||||
| select the suitable mode to the item VIDEO of the INPUT menu. | ||||
|
|
|
| ||
| Set the time using the 5 / 6 buttons. : | ||||
| Long (max. 99 minutes) |
|
| Short (min. 0 minute = DISABLE) | |
|
|
| |||
| AUTO |
|
| AUTO | |
| POWER OFF |
|
| POWER OFF | |
| ENABLE |
|
| DISABLE | |
POWER OFF | 1min |
|
| 0min | |
|
|
|
| ||
ex.
When the time is set to 1 to 99, the projector lamp will go off and the STANDBY/ON indicator begins blinking when the passed time with
aproper signal (without
Select the TURN ON or the TURN OFF using the 5 / 6 buttons.:
TURN ON |
| TURN OFF |
| ||
POWER ON When the TURN | ON is selected, you can turn the projector on with- | |
out pressing the STANDBY/ON button. Please refer to the section | ||
“Turning On The Power”. | ||
|
|
|
|
| (This table is continued to the following page.) |
28 Multifunctional Settings
