Troubleshooting
Related Messages
When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company.
memo Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.
|
| Message | Description |
|
|
|
|
|
| CHANGE THE LAMP | The time the lamp timer has counted is |
|
| approaching 2000 hours. | |
|
| AFTER REPLACING LAMP, | |
|
| Preparation of a new lamp, and an early lamp | |
|
| RESET THE LAMP TIMER. | change is recommended. After you have change |
|
|
| the lamp, please be sure to reset the lamp timer. |
|
| CHANGE THE LAMP | The time the lamp timer has counted is |
|
| approaching 2000 hours, so a lamp change | |
|
| ||
|
| AFTER REPLACING LAMP, | within ** hours is recommended. |
|
| When lamp usage reaches 2000 hours, the power | |
|
| RESET THE LAMP TIMER. | |
|
| will automatically be turned off. | |
|
|
| |
| THE POWER WILL TURN OFF | Please change the lamp by referring to the section | |
|
| AFTER ** hr. | “Lamp”. After you have changed the lamp, please |
|
|
| be sure to reset the lamp timer. |
|
|
|
|
|
| CHANGE THE LAMP | As the time the lamp timer has counted has |
|
| ||
|
| AFTER REPLACING LAMP, | reached 2000 hours, the power will soon be |
|
| ||
|
| automatically turned off. | |
|
| RESET THE LAMP TIMER. | Please immediately turn the power off, and |
| THE POWER WILL TURN OFF | change the lamp by referring to the section | |
|
| AFTER 0 hr. | “Lamp”. After changing the lamp, please be sure |
|
| to reset the lamp timer. | |
|
|
|
|
|
|
| (This table is continued to the following page.) |
NOTE |
| ||
•A lamp has a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This projector is equipped with an automatic
40 Troubleshooting
