Controls and Functions
Control Panel
8
7
3 |
|
2 | 4 |
1 |
|
|
|
| 5 |
|
|
|
| ||
|
|
|
|
| |
|
| 6 | |||
|
|
| |||
|
|
|
1.STANDBY/ON (Refer to pages 18, 20 and 30 for more information.)
Press this key for ONE second to turn the projector on when it is in the standby mode. Or press this key twice to turn the unit off.
POWER light
Indicates whether the unit is on or off
The orange light shows when the AC power cord is plugged into the wall outlet (standby mode). Once in the standby mode, you can press the STANDBY/ON key on the projector or the ON key on the remote control for ONE second to turn the projector on.
The green light shows when the power is turned on and the projector is operating. Flashes orange for the first 60 seconds during powering up, indicating that the lamp is warming up.
Flashes orange for two minutes after the projector is turned off to indicate that the lamp is cooling.
2. MENU / EXIT (Refer to page 21 for more information.)
Turns the
3ARROWS (c/e/d/f) (Refer to page 22 for more information.)
Used to select the desired menu items and to make adjustments.
4. ENTER (Refer to page 22 for more information.)
Opens the selected item of the menu.
5. LAMP indicator light (Refer to page 30 for more information.)
Indicates the status of lamp.
Shows a red light when the lamp has developed a problem. Please contact your BenQ dealer for assistance.
6. TEMPERATURE WARNING LIGHT (TEMP) (Refer to page 30 for more information.)
Lights if the projector’s temperature becomes too high.
7. Zoom Ring (Refer to page 18 for more information.)
Adjusts the size of the image
Rotate clockwise to enlarge the image or rotate
8. Focus Ring (Refer to page 18 for more information.)
Adjusts the focus of the projected image.
12Overview