BenQ PE6800 user manual Indicators, When the projector is in a normal state

Indicators

There are three indicators which show the status of the projector. Check the following for information about the indicator lights. If there is anything wrong, turn the projector off and contact your dealer.

When the projector is in a normal state, ...

POWER	LAMP	TEMP	STATE	REMARK
Orange			Standby mode.
Flashing			Lamp standby mode.	Cannot turn the projector off.
Green
	Off	Off
Green			Power on.
Flashing			Lamp is cooling down.	Cannot turn the projector on.
Orange

When the projector is in an abnormal state, ...

POWER	LAMP	TEMP	STATE		REMARK
				Solution:
			The internal temperature is too	• Make that the ventilation
			high.		holes are not blocked.
			• The intake ventilation or the	•	Relocate the projector.
	Off	Red	exhaust ventilation is blocked.	• Stop using the projector until
			• The projector may be in a		the ambient temperature falls
			poorly ventilated location.		within the specified range.
Orange			• The ambient temperature may		The maximum operating
			be too high.		temperature is specified as
					35°C / 95°F.
				Solution:
			The projection circuit is working ,	•	Restart the projector.
	Red	Off		If this operation is repeated several
			or the lamp is abnormal.
				times and the lamp indicator remains in
				red, replace the lamp and contact your
				dealer for assitance.
			Almost time to to replace the lamp.
Green			The lamp has been used for 1000
	Flashing		hours. (The power is on.)
	Red
		Off	Almost time to to replace the lamp.	Solution:
			The lamp has been used for 1000	• Install a new lamp.
			hours. (The power is off.)
Orange	Red		Time to to replace the lamp. The
			lamp has been used for 1500 hours
	Flashing	Flashing	The cooling system has a problem.	Contact your dealer.
	Red	Red

30Additional Information