DualRemote 350 Reference 10

The DualRemote 350

Indicators

Pair Status Indicators

The pair status indicators turn green or red at the end of a test to show the status of each pair. A red indicator means the associated pair failed the current test.

Warning Indicators

The warning indicators denote conditions that might prevent or impair testing.

Hub/NIC Detected: The Hub/NIC Detected indicator means the DualRemote 350 is connected to a hub/Switch port or NIC port, instead of to a port connected to the FrameScope 350. [This function is not yet supported.]

Voltage Warning: The voltage warning indicator means the DualRemote 350 is connected to a line which has a potentially damaging voltage present. This condition usually occurs when attempting to test a line that is connected to a telephone switch.

Calibration Required: The Calibration Required indicator means the DualRemote 350 is not calibrated to the FrameScope 350. The autotest will not execute until the calibration is done.

Battery: The battery indicator shows the current state of the

DualRemote 350 battery charge.

When an external charger is supplying power to the DualRemote:

The Battery indicator is steady green when the battery is charging.

The Battery indicator flashes green when the battery is fully charged.

When no external charger is connected to the DualRemote:

The Battery indicator is dark when the battery is operating normally.

The Battery indicator is red when the battery charge is low.

Test Progress and Result Indicators

Progress: The Progress indicators show approximately how much of the current test is complete 1/3, 2/3, and complete.

Agilent FrameScope 350 User’s Manual

221

Page 229
Image 229
Agilent Technologies N2610A user manual Pair Status Indicators, Test Progress and Result Indicators