Agilent Technologies N2610A - page 74

66 Agilent FrameScope350 User’s Manual
3Cable Testing with the FrameS cope35 0
Setting Up an Autotest
2To set the beginning number to other than 1, press the Enter Start
Value field. The onscreen keyboard opens.
3Press the backspace arrow to erase the number in the display, then
press the number keys to enter the new starting number. Press OK.
The keyboard closes, and the new starting number appears in the
Enter Start Value field.
4To set the number of cable runs to label and test, press the Enter
End Value field. The onscreen keyboard opens.
5Press the backspace arrow to erase the number in the display, if any,
then press the number keys to enter the new number. Press OK . The
keyboard closes, and the new ending number appears in the Enter
End Value field.
6Press OK. The Autotest Setup screen displays.