Cable Testing in Expert Mode 5
The Expert Autotest Setup
2On the Autotest Setup screen, press Edit Settings. The Autotest Settings screen shows a menu of parameters and functions.
3Press the name of the probe, then press View. The Probe Information screen displays, with information on the probe inserted in the FrameScope.
4If you desire to check the probe test count before each test, press Check Probe Test Count and enter the limit to be tested against.
5To view information on the probe installed in the DualRemote, press the DualRemote tab. The Probe Information screen displays information about the probe in the DualRemote after running an Autotest.
6If you desire to check the DualRemote probe test count before each test, press Check Probe Test Count and enter the limit to be tested against.
Setting Network Limits
The FrameScope 350 can determine compliance with signal to
noise ratio (SNR) requirements for a variety of popular LAN
technologies. To do this:
1In Expert Mode, press Autotest on the Main Menu. The Autotest Settings screen displays.
2On the Autotest Setup screen press Edit Settings.
3On the Autotest Settings screen press Network Limits. Then press Edit.
4On the Networks Setup screen press on the appropriate technology for which you want to certify the tested cabling. A red check will appear in each technology selected. Other includes a variety of legacy network standards.
Agilent FrameScope 350 User’s Manual | 125 |
