Agilent Technologies N2610A To run an autotest:

78 Agilent FrameScope350 User’s Manual
3Cable Testing with the FrameS cope35 0
Running an Autotest
Running an Autotest
To run an autotest:
1If this is the first test of the day or after a long break, calibrate the
tester. See “Calibrating the Tester” on page61.
2Connect the FrameScope 350 and Dual Remote 350 to the ends of the
circuit needing certification.
3On the FrameScope Main Menu, press the button identifying the
selected test. The test executes.
4If the autotest passes, the screen will look like this:
5To save the test results, see “Saving Test Results” on page 79