4Fiber Testing
Setting Up an Autotest
Choosing the Network Limit
The FrameScope 350 can certify cabling for compliance with the physical medium dependent (PMD) requirements of popular network interface technologies such as Ethernet or ATM. Network certification can be performed in addition to certifying to cabling limits.
A pass result for a particular networking technology indicates that the tested cable run meets the loss and length requirements necessary to successfully support communications between devices of that type.
To choose the network limit:
1On the Fiber Autotest Settings screen, press Network Limits, then press Edit. The Networks Setup screen displays.
2Press a limit to choose it. When you have placed check marks next to all types of networks you wish to certify, press OK. The Fiber Autotest Settings screen displays.
Entering the Site Name
The site name identifies the group of settings used on a job.
106 | Agilent FrameScope 350 User’s Manual |
