4Fiber Testing
Setting Up an Autotest
3Press OK. The Fiber Autotest Settings screen displays.
Loss/Length Method
When Loss/Length Method is selected, the FrameScope 350 calculates the limit based on the length of the cable tested. You can set values for connectors, loss per connector, splices, and loss per splice. The connector and splice losses are added to the loss that is calculated by multiplying the length of the fiber by the loss/Km specification of the selected cable, which is shown at the bottom of the Setup screen.
When you select Loss/Length Method and press Next on the
Loss Limit Setup screen, the screen changes to the following:
1To set any of the variable values, press the variable. The numeric keypad opens.
2Press the backspace arrow to erase the displayed value, then enter the new variable value. Press OK. The keypad closes.
104 | Agilent FrameScope 350 User’s Manual |
