Cable Testing in Expert Mode 5
The Expert Autotest Setup
1On the Autotest Setup screen, press Cable Pairing, then press Edit. The Cable Pairing Setup screen displays.
Press the cable pairing convention used on the job, then press OK. The Autotest Setup screen displays, with the cable pairing convention named.
Setting the Measurements
In Expert Mode, you have the ability to specify in detail what measurements are used to determine the certification status of your test. In addition, there are choices for optional features.
1In Expert Mode, press Autotest on the Main menu.
2On the Autotest Setup screen press Edit Settings. On the Autotest Settings screen press Measurements. The first Measurements Setup screen identifies the required measurements for the limits you have selected. It is possible to disable the measurements, but it is not
Agilent FrameScope 350 User’s Manual | 129 |
