Cable Testing in Expert Mode 5
The Expert Autotest Setup
the Test Probe setting is not locked you will go directly to the Password Screen, where you can choose to password protect your profile.
3If you choose to password protect your profile, you will be prompted to enter the password. Once you are satisfied with your password selection, press OK to return to the Autotest Settings screen, where the locks will be shown. If it is password protected, you will now be prompted to enter the password in order to modify this profile.
Creating a New Settings Profile
A new profile may be created either directly on the FrameScope 350 or on a PC using ScopeData Pro and subsequently downloaded into the FrameScope 350. To create a settings profile directly on the FrameScope 350:
1You must configure all the Autotest Settings to the desired settings prior to creating a new profile. Profiles created on the FrameScope
Agilent FrameScope 350 User’s Manual | 121 |
