8Network Performance Analyzer Reference
Memory Requirements
Memory Requirements
The FrameScope 350 requires a CompactFlash™ card to store test results and network station lists. The amount of memory that each Autotest result takes up depends on the number of test and the number of iterations that you set before starting the test. The results require about 600 bytes per test plus 150 bytes per iteration for each test. There is a limit of 100 tests and a limit of 100 iterations. Therefore, the maximum results size is about 1. MB.
The Autotest suite storage requirement is only 350 bytes per test, so the maximum size is about 35 KB.
The station list storage requirement is 250 bytes per station with a maximum of about 1500 stations, so the maximum size is 375 KB
The FrameScope 350 does not use any of the 4MB of internal Flash memory for network test result storage. The cable test results can be stored in the internal Flash memory.
The following table lists approximate record storage capacities when configured for a 32 MB removable CompactFlash™ card and for comparison, a 192 MB card. All sizes of CompactFlash™ will work as FrameScope 350 Network Autotest results storage.
210 | Agilent FrameScope 350 User’s Manual |
