3Cable Testing with the FrameScope 350

Setting Up an Autotest

2Select Create a New Site Name, then press Next. (The OK button changes to a Next button when you select Create a New Site Name.) The screen changes, to allow naming the site.

3 Press the icon under

The onscreen keyboard opens.

4Press the keyboard keys to enter the site name, then press OK. The keyboard closes.

Choosing the Labeling Format

The labeling format specifies the scheme used to label test records for that site. This format is applied to the test report and to labels printed for the job. There are three label format options:

Simple has only one field, such as ‘cable number”. See page 65 for the Simple format configuration procedure.

TIA-606-Acomplies with the TIA-606-A standard. See page 67 for the TIA-606-A format configuration procedure.

Hierarchical has multiple fields, for designations such as Building, Floor, Wall Plate, and Jack Number. See page 69 for the Hierarchical format configuration procedure.

64

Agilent FrameScope 350 User’s Manual

Page 72
Image 72
Agilent Technologies N2610A user manual Choosing the Labeling Format