Agilent Technologies N2610A user manual Using Talksets, Talkset Controls

Cable Testing with the FrameScope 350 3

Using Talksets

Using Talksets

The 2-Way Talkset Kit (N2605A-137) allows operators at opposite ends of a copper cable run to coordinate their efforts.

To use talksets for communicating between the ends of a cable run:

1Insert a talkset’s plug into the talkset jack on the FrameScope, and the plug of another talkset into the jack of the DualRemote. See “Talkset Port” on page 5, for the jack’s location.

2Connect the FrameScope’s and DualRemote’s SmartProbes to the ends of a cable run.

3Speak and listen as with any telephone headset.

Talkset Controls

The FrameScope talksets have two controls:

•The thumbwheel in the inside curve of the control housing controls the earphone volume.

•The switch on the outside curve of the control housing switches the microphone off.

Agilent FrameScope 350 User’s Manual 87