System Operations | 7 |
Remote Control
Remote Control
The FrameScope can be controlled through its web interface. Before this interface can be used, it must be enabled through the Remote Control Setup wizard. This wizard also lets the user choose the level of security which will be used on the web inter- face. A User Name and a Password may be entered and a Port other than the default (80) may be used. If the Port is changed, then it must be specified when accessing the FrameScope. For instance, if the FrameScope’s address is 209.6.108.252, it would normally be accessed with the following URL:
http://209.6.108.252/
If the port is changed to 8080, the following URL would be used:
http://209.6.108.252:8080/
When the Remote Control settings have changed, the
FrameScope must be rebooted to use the new settings.
Agilent FrameScope 350 User’s Manual | 173 |
