Cable Testing in Expert Mode 5

The Expert Autotest Setup

2On the Autotest Setup screen press Edit Settings. On the Autotest Settings screen press Save, then Edit to bring up the Save Mode Setup screen. Press Summary Data Only or Full Data Set.

Setting the Storage Location

This is the same function as that shown in the System Settings screen. Also when a CompactFlash™ card is inserted, this function will automatically set the storage location to the CompactFlash™ card See Configuring CompactFlash™ Cards, on page 2-6.

Setting the Operator Names

The names of the technicians performing the tests can be entered, and will appear on the test report. This is the same function as that shown in the System Settings section See Entering the Operator Names, on page 3-18. If it has been done already there, it is reflected here.

Agilent FrameScope 350 User’s Manual

133

Page 141
Image 141
Agilent Technologies N2610A user manual Setting the Storage Location, Setting the Operator Names