Fiber Testing 4
Setting Up an Autotest
1On the Fiber Autotest Settings screen, press Site, then press Edit. The Site Setup screen displays.
2Select Create a New Site Name, then press Next. (The OK button changes to a Next button when you select Create a New Site Name.) The screen changes, to allow naming the site.
3Press the Enter New Site Name fieldThe onscreen keyboard opens.
4Press the keyboard keys to enter the site name, then press OK. The keyboard closes.
Choosing the Labeling Format
The labeling format for fiber is the same as that for copper. See
“Choosing the Labeling Format” on page 64 for more
information.
Agilent FrameScope 350 User’s Manual | 107 |
