Fiber Testing | 4 |
Setting Up an Autotest
1On the Fiber Autotest Settings screen, press the connector icon, then Edit. The Connector Setup screen displays.
2Press Next. A list of that connector types displays.
3Press the type of the connector, then press OK. The Fiber Autotest Setup screen displays, with the selected connector type next to the connector icon. If you do not see the connector on the list, see the next section.
Adding a new connector type
If you have a connector which is not in the connector database, you can add a new connector description to the database.
1If the manufacturer is not present, leave the manufacturer as Unspecified. If the manufacturer is present in the list, select it, then press Next. The next Connector Setup screen is displayed. In either case you will be offered stored
Agilent FrameScope 350 User’s Manual | 111 |
