16 Agilent FrameScope350 User’s Manual
2Network Testing with the F rameScope 350
Network Testing Overview
Network Testing OverviewThe following steps describe the general procedure for
performing network analysis testing using the FrameScope350.
1Power th e unit o n. See “Switching the FrameScope On and
Off” on page 10.
2Press the Network tab on the Main Menu to begin.
3Connect to the network under test. See “Connecting to the
Network” on page 12.
The FrameScope automatically begins to poll the network
and locate devices. See “Examining the Network” on page 17.
4View details about the detected network resources. See
“Detailed List” on page18.
5Perform an Autotest on any or all desired resources. See
“Running an Autotest” on page19.
6Select any devices on the network and perform additional
testing, such as:
•Ping test; see page28.
•Trace Route test; see page31.
•SNMP Queries; see page34.
7Save results as desired, perform other tests or functions.