Agilent Technologies N2610A To run an autotest:

114 Agilent FrameScope 350 User’s Manual
4Fiber Testing
Running an Autotest
Running an Autotest
To run an autotest:
1Connect the FrameScope 350 and Dual Remote 350 to the ends of the
circuit needing certification.
2On the FrameScope Fiber Main Menu, press Fiber A utotest. The
Fiber Autotest Setup screen displays.
3Press Start Test. The autotest executes.
4Follow the on screen directions, which may include swa pping fiber
connections.
5To save the test results, see “Saving Test Results” on page 79