Agilent Technologies N2610A user manual 208

8Network Performance Analyzer Reference

Network Tools

Destination MAC To send a frame to a station on the local LAN, enter its MAC address. If the destination address is set to FF-FF-FF-FF-FF-FF, the frame will be received by all devices on the LAN. To send a frame across a router, the router’s MAC address should be used.

Source IP or IPX Source network address, if required. If Source MAC is set to simulate multiple stations, then the Source IP is incremented along with the MAC. For instance, if the FrameScope is set up to generate Ethernet/IP frames from multiple simulated stations with IP Address set to 209.6.108.202, then the first two frames would be addressed as follows:

Frame Number	MAC Address	IP Address
1	00-0C-65-01-00-01	209.6.108.202
2	00-0C-65-01-00-02	209.6.108.203

Destination IP or IPX Destination network address, if required.

208 Agilent FrameScope 350 User’s Manual